Free Jeep Wrangler radio code
Most Jeep Wrangler radio codes are calculated from the T00 or A2C serial on the radio label, and FreeCarRadioCodes does that free with a 24 hour wait or straight away with the instant service. A serial starting T00AM, or one from the QN families, lives only in the manufacturer's database, so those carry a small charge.
Jeep Wrangler
Most Wranglers have a Chrysler-group radio with a serial starting T00, TM9 or TVP, or a Continental unit with an A2C serial, on a label on the casing. Those are worked out here on the spot. Some later Uconnect units carry a serial starting T00AM or T16QN, T19QN, T22QN, T25QN, T30QN or T82QN, and those codes come from the manufacturer for a small charge. Either way the serial box tells you which before you commit.
Same radios, same serials, same offer as every Jeep. All Jeep radios
Where the serial is
Many Jeep radios show the serial on screen. Turn the radio on so it says CODE, then hold preset 1, or 1 and 6 together, for a few seconds. If the screen stays blank, look for the serial on the radio's label casing: 14 characters starting T, like T00BE318649027. Pull the trim bezel off and undo the screws either side to slide the radio out. The first five characters tell you which family the radio is, and that decides whether the code is free.
How to enter the code
- 1Turn the ignition on and press the radio power button. The screen shows CODE.
- 2Press the preset button that matches each digit, in order. On touchscreen units, tap the digits on the keypad and press Enter.
- 3The radio unlocks after the fourth digit. If it shows CODE again, the entry was wrong: check the digits and try once more.
- 4If it shows WAIT, the radio has locked after too many tries. Leave the ignition on and let the timer run, up to an hour, before you enter the code again.
Jeep Wrangler · Questions people ask
Is a Wrangler radio code free?
For most serials, yes: T00BE, TM9, TVP, T00 plus digits and A2C are worked out here free in 24 hours or the instant service. T00AM and the QN families are bought in at a small charge.
My Wrangler serial starts T00AM. Why is there a charge?
Because that code only exists in the manufacturer's database and cannot be worked out. We buy it in and pass it on at a small charge, within 24 hours, usually much sooner.
Where is the label on a Wrangler radio?
On the casing, so the unit has to come out of the dash. The serial is the line starting T or A2C, usually next to a barcode.