Nissan Juke radio code
A Nissan Juke radio code is not free anywhere: it only exists in Nissan's database, for the Nissan Connect unit and the Clarion one alike. FreeCarRadioCodes buys it in for a small charge and emails it within 24 hours, usually much sooner.
Nissan Juke
Most Jukes have either a Clarion CD unit or the Nissan Connect LCN, and later ones Nissan Connect 2 or 3. The Clarion serial is on the label after PN or PP. Nissan Connect shows a 7-digit serial on the screen and has a 7 612 unit number on the label; Daewoo units have a DW or DS serial with a 28185 unit number beside it. We need both numbers. The label is on the casing, so the radio has to come out with release keys.
Same radios, same serials, same offer as every Nissan. All Nissan radios
Where the serial is
Every Nissan radio has a label on its casing, so the unit has to come out of the dash. Nissan Connect (the Bosch LCN unit) shows a 7-digit serial on the screen while it is locked, and the label carries a unit number that looks like 7 612 830 076: we need both, so type the serial in the first box and the unit number in the second. Daewoo-made units have a serial starting DW or DS on the label with a 28185 unit number next to it, and again we need both. Older Clarion units carry the serial after PN or PP. Blaupunkt-made units have a BP serial.
How to enter the code
- 1Turn the ignition on and switch the radio on. The screen shows CODE, or a keypad on Nissan Connect.
- 2Type the four digits with the on-screen keypad. On Clarion units press preset 1 to set the first digit, 2 for the second, and so on.
- 3Check the four digits, then press OK or ENTER. The radio comes on straight away if the code is right.
- 4If the screen says WAIT or LOCKED, leave the radio on with the ignition running for an hour, then try again.
Nissan Juke · Questions people ask
Is there a Juke radio code generator?
Nissan codes are not calculated from the serial, so nothing can generate one. The only source is Nissan's database, which is where ours come from at a small charge.
How do I enter the code on a Juke Nissan Connect?
Switch on, and the screen shows a keypad. Type the four digits and press OK. On a Clarion unit, set the digits with presets 1 to 4 and press ENTER.
Is the Juke code the same for a second-hand radio?
Yes. The code belongs to the radio, not the car, so a unit from a breaker is looked up from its own label in the same way.